That’s silly. A motherboard with a free pci slot (I think x8? Been awhile), a cheap hba with the associated sas cables, and literally any case that will hold the drives. You could strap them all to a board if you wanted

Obviously you’ll need cpu and ram. Make sure the power supply is beefy enough to cover the amount of drives you plan to use and preferably get a good quality one if you plan to run it 24/7. I do think it’s worthwhile to get server grade hardware as it holds up better to long term 24/7 use but it’s not necessary. It’s also absolutely fine to go entirely used; my whole build was all ewaste and was maybe $300 minus the drives (which added much more). And my build was frankly overkill for a nas but I also run VMs and do some local llm stuff. If you just want to serve files for like Jellyfin/plex you really don’t need much, an ewaste pc from like 2015 will probably do the job spec wise (though increasing ram a lot can help significantly especially if you do zfs)

I have a 15 drive nas. My drives are sata but my hba is compatible with sas drives. I use an lsi 9300-16i and I have read of people using it with sas arrays just fine. If you shop around you can get it with cables for like $40-50 used (maybe more now since inflation fucked everything and you need the less common cables). Be careful because there are lots of counterfeits.

Also be mindful of cooling, the card runs HOT. I added active cooling to mine with a 3d printed bracket. If you’re only running 3-4 drives you could also get the 9300-8i which is cheaper and runs cooler, but has half the drive lanes so you’re limited in terms of future expansion.

Is it exposed to the internet?

Mine is local only so I’m not as diligent with updates. I push them like once every 2-3 weeks. Some containers automatically update but some don’t because in the past that has broken associated scripts

Works from db0, congrats

Oh I didn’t mean larger like that, I meant width wise. Standard rack width is 19 inches so if it’s one of those specialty racks that’s narrower that thing I said about repurposing an old 1u/2u is pointless because it won’t fit. Doesn’t mean you can’t or shouldn’t use this rack, just that that idea is no good.

4u is fine unless you want to expand down the line. Networking gear and stuff. However if it’s a narrow rack I don’t think there will be much to put in it for those purposes? Depends on your goals. I have a larger rack but I also have my whole networking stack in it, switch, poe switch, ups, router, nas, etc.

I would consider posting on the unraid forums. There may be someone who has used similar hardware and can give guidance on how they approached the setup. The benefit of unraid is ultimately that the support community is very solid

How do you connect the drives? Looking at specs there’s only one sata port (which I don’t actually see anywhere, but it says it is there, although using it slows the second nvme lane)

USB connected drives in a raid array are not ideal. USB connectivity is not as solid as a direct sata connection and a drive suddenly disappearing from your area, especially parity, is quite a headache

No pci slot so you can’t add an hba for more sata lanes either. You could do one of those nvme to sata things but I’ve heard bad things about the reliability of those.

If it’s free though I def think it’s worth finding a way to make it work. The specs are more than enough for unraid and usually those tiny pcs are pretty power efficient, which is nice. But that’s the issue to work around, connecting the hard drives reliably.

WRT what to put them in it could be anything really. You could get a cheap broken 1 or 2u server case where someone’s pulled the motherboard and powersupply, rig something in there to hold them all. Should be more than enough space for 5 drives and will probably have cages for at least 2-3, maybe all 5 if you get lucky. Might even have hot swap ones. Dunno if this would fit though, that rack looks small and I couldn’t get the specs to load, is it full sized or a tiny one?

Could also see if there’s some kind of 3d print thing. There’s probably a 3d print thing to rack mount that mini pc.

Is the windows side up to date? Most likely culprit would be a db mismatch if one side or the other is on a different version. Similarly, do you by chance have either side running a beta release? If you have plex pass you potentially have access to these

Shameless moment to plug the idea that you could consider migrating to Jellyfin if you can’t solve the issue

On device isn’t always ideal. I don’t use immich because i don’t have a large photo library. But I do use komga. Nextcloud can sort and manage epub/pdf like komga but as poVoq said, the specialized solution is superior

This point is where on device app is not the ideal situation, for me at least. These apps exist. Tachiyomi and the resultant forks can import a local library. And frankly even a somewhat massive local library can fit on a cheap SD card

The point of the server is portability. With this I have portability across my devices. My library, reading status, metadata, etc is available on all devices. I can read a book on my ereader, close it, the status is synced. I can pick up from my laptop and the same thing occurs. I can pick up from my phone, download the book to my device, and keep reading while I’m away from home. If I wanted to I could open remote access to my server and avoid the need for downloading the books but that’s a whole thing

I don’t think it would make sense to run a server solely for this but it’s a service that doesn’t take much in terms of resources and I read a lot.

oh duh

https://github.com/wasi-master/13ft/blob/main/docker-compose.yaml - this is the 12ft.io replacement i use. there are a few clones but this is the one I like, it’s real barebones and uses very little overhead

https://komga.org/ - komga library https://github.com/Snd-R/komf - komf - this isn’t strictly necessary but it fetches metadata for your komga library from sites like manga updates. can be a bit of a pain to configure https://github.com/Snd-R/komf-userscript - this is a tampermonkey script that makes komf MUCH easier to use https://github.com/dazedcat19/FMD2 - this is an app that rips manga from most of the “free manga” indexer sites like mangadex, bato, etc. docker and kubernetes version at https://github.com/ElryGH/docker-FMD2

you can read directly via komga web but frankly it kind of sucks for that. i prefer using an app. tachiyomi was the gold standard but companies threatened it and they stopped development. there are several forks now that are all good in various ways. i prefer mihon https://mihon.app/ but there are alternatives that have different feature sets

A clone of 12ft.io but the old version before they got into beef with the New York Times and kneecapped it. It doesn’t work on every single article with a paywall but it works on the overwhelming majority (including New York Times articles)

And it doesn’t really count because I knew I’d use it but komga+komf+fmd2. I list it though because I didn’t realize I’d use this stack so much. I can now read with my phone, my laptop, my ereader, etc. tachiyomi/mihon works, reading progress is synced, and I never have to visit one of those garbage manga aggregation sites ever again

I mean yes but it’s also the official title for the English release of the game.

Like to be clear I’m not being the person who’s like “oh have you seen Kôkaku Kidôtai?” And then you’re like “what the fuck is that” and I’m like “uh, I guess if you’re uncultured you might know it as ghost in the shell.” And then everyone in the room groans because of fucking course every single person who speaks English as a native language has always called it ghost in the shell

なに?!

The new one has more game music than old ones did. But to get a lot of it you have to subscribe. Thankfully the subscription isn’t terribly expensive ($10/3mo) and it’s easy to get it in a way that doesn’t auto renew. Music licensing is stupid though so music games are dying and will probably forever be subscription services going forward. The days of buying a game like guitar hero are long gone.

It has the classic ones like Mario medley, Zelda overworld, Kirby, persona 5, undertale, etc. but the game pass adds stuff like tekken, id@lmaster, ridge racer, tales of symphonia, ace combat, etc.

it’s a weird mix that’s definitely missing a lot of iconic stuff though. The push is definitely more pop/vocaloid/anime music

Alternatively you can get something like opentaiko or tjaplayer (closer to the real game) and use custom charts from a site like https://ese.tjadataba.se/ESE/ESE . You need a pc but it doesn’t require a particularly great pc and pretty much every drum controller, including the official console ones, work on pc.

I definitely wish it was more popular in the west. Online play is an absolute ghost town unless you play during Japan time. Like if you play during peak us hours matchmaking will literally spend 20-30 minutes to find no one.

That’s not Japanese fyi, 太鼓の達人 is the Japanese name

It is Japanese drumming game with an associated controller, I posted a guide with pictures to modify the drum controller so it’s more sensitive to being hit

I posted a guide to modding a tatacon for taiko no tatsujin

lmao clicked that link and one of the first comments I see is “reddit is pretty decentralized”

I get that 404 needs to make money but this article could greatly benefit from not being paywalled. Or at least list a definition of what decentralized social media is with some actual recommendations before the paywall because people clearly have no fucking clue